Click to zoom

  • Sync / Trigger your flash or camera from as far away as 300 m (1000 ft).

  • Receiver and transmitter
  • Range up to 300 meter
  • Radio flash sync & camera release
  • Integrated antenna
  • Worldwide use at 2.4 GHz
  • Auto power saving
  • Up to 1/1600 sync time (leaf shutter/depending on camera)
Product number: 
  • 901032

Information

Profoto Air Sync provides a simple solution when you do not need to control the power of your flash and only need to trigger it, with your camera. Profoto Air Sync can also be used as a receiver to sync generators without built in Profoto Air.

Profoto Air Sync devices deliver sync signals with a very short delay, just 200µs in fast mode. Signal connections are made with either a hot shoe or a cable. This small, handy device weights only 40 g (1,4 oz) including batteries. Operating at 2.4 GHz, it's approved for world wide use. Profoto AirS / Air Sync systems can also operate with external receivers on older generators or other brands. Profoto Air Sync syncs / triggers flash generators or cameras with the same high performance as Profoto Air Remote. The Profoto Air Sync provides a simple solution when you do not need to control the power of your flash and only need to trigger it. Profoto Air and AirS flash units come with an integrated receiver.

Profoto Air Sync can also be used as external receiver and to sync generators without built in Profoto Air. A wide asortment of optional sync cables allows combination with many makes of flashes.

Optional camera cables allow using Air Sync's as radio release system.

Delivered with: 
  • Strap
  • Batteries

Technical Data

Specifications – Air Sync

Frequency band

2.4 GHz

Separate radio channels

8

Group/radio channels

N/A

Range

Range Up to 300 m (1000 ft)

Battery type

2 x AAA

Typical battery lifetime Transmit mode Fast/Normal

10 hrs/140 hrs

Typical battery lifetime Receive mode

30 hrs

Sync delay, Fast/Normal mode

200 µs/465 µs

Antenna type

Integrated

Auto power off

30 min of inactivity

Synchronization and control

Sync signal in

ISO 518 hot shoe and 3.5 mm miniphone plug

Sync signal out

3.5 mm miniphone plug

Complete flash control

N/A

Remote flash energy control

N/A

Remote modeling light control

N/A

Automatic interaction with generator

N/A

Master mode

N/A

Sync/Trigger

Yes

Measurements

Dimensions

70x50x40 mm (2.7x1.9x1.6 in)

Weight

40 g (1.4 oz)

Nomenclature

  1. Channel Indicators
  2. Channel Button
  3. Transmit Indicator
  4. Mode Button
  5. On Button
  6. Test Button.
  7. Receive Indicator
  8. Sync In Connector
  9. Sync Out Connector
  10. Hot Shoe Connector (Not visible in this picture)

User Guide

Image