A safe, reliable and flexible battery/inverter to power Profoto D1, ComPact monolights or Acute2 generators on location.
- Safe and reliable
- Versatile
- High power
- High capacity
- Fast recycling times
- Integrated protective
- circuits
- Handy & transportable
- 901124
Information
Product Advantages & User Benefits:
-
Safe and reliable
Especially developed to power advanced flash equipment like Profoto D1 monolights, guarantees proper function and eliminates the risk to damage the flashes. -
Versatile
Works with Profoto D1, ComPact and Acute2 flash equipment. But can be used for other electrical devices like chargers, wind machines, refrigerator boxes and constant light sources as well. -
High power
One BatPac can drive up to 4 Profoto D1 (250Ws, 500Ws and 1000Ws), 2 Profoto ComPact (300Ws, 600Ws and 1200Ws) monolights or one Profoto Acute2 (1200Ws or 2400Ws) generator. -
High capacity
Integrated heavy duty battery delivers up to 300 flashes with 1000Ws, 600 flashes with 500Ws, 1200 flashes with 250Ws etc. -
Integrated protective circuits
The BatPac is protected against overcharge, short circuit, high temperature and low input voltage. A ground fault circuit interrupter protects the user and all connected devices. -
Handy & transportable
A robust nylon transport bag is integral part of the BatPac. The carry handle, detachable shoulder strap and stowable harness makes it easy to maneuver the BatPac even if it is in use.
- 2A Charger
Technical Data
Specifications – BatPac
| Max continuous output power | 600 W, power limited output |
| Battery type | Sealed lead acid battery 12V, 17Ah |
| Nominal battery capacity | 17 Ah |
| Maximum input current | 60A |
| Output voltage/frequency | 120 VAC ±3%, 60Hz or |
| 230 VAC ±3%, 50 Hz depending on model | |
| Output wave form | Pure sine wave |
| Total harmonic distortion | < 3% |
| Idle current consumption | 120 VAC: < 0.6 A |
| 230 VAC: < 0.8 A | |
| Input voltage range | 10.5 – 16.5 V |
| Low voltage alarm | 10.5 V |
| Low voltage shutdown | 10 V |
| Storage temperature range | -10-50°C |
| Operating temperature range | 0-40°C |
| Dimensions (L x W x H) | 26 x 28 x 37cm incl. bag |
| Weight | 11.5 kg, including bag |
| Recharging (from empty battery) | 8 hours with the Profoto Battery Charger 2A |
| Ground Fault Circuit Interrupter | Yes |
| Fuses | ATO® Fuse Fast-Acting Type (2x30A) |
Battery Capacity
Profoto D1
(used in “Bat mode”, model light off)
| 2000Ws (2x D1 1000 or 1x D1 1000 & 2x D1 500 or 4x D1 500): | max. 150 flashes |
| 1000Ws (1x D1 1000 or 2x D1 500 or 1x D1 500 & 2x D1 250 or 4x D1 250): | max. 300 flashes |
| 500Ws (1x D1 500 or 2x D1 250): | max. 600 flashes |
| 250Ws (1x D1 250): | max. 1200 flashes |
| 125Ws: | max. 2400 flashes |
| 62,5Ws: | max. 4800 flashes |
| 31,25Ws: | max. 9600 flashes |
Profoto Acute2
(max. 1 generator, model light off)
| 2400Ws: | max. 120 flashes |
| 1200Ws: | max. 250 flashes |
| 600Ws: | max. 500 flashes |
| 300Ws: | max. 1000 flashes |
| 150Ws: | max. 2000 flashes |
| 75Ws: | max. 4000 flashes |
| 37,5Ws: | max. 8000 flashes |
Recycling time
Profoto D1
| D1 1000 Recycling times (120V or 230V, mains powered): |
2.0-0.2s |
| Recycling times (120V or 230V, BatPac): | 5.0-0.5s |
| D1 500 Recycling times (120V or 230V, mains powered): |
0.95-0.2s |
| Recycling times (120V or 230V, BatPac): | 2.4-0.35s |
| D1 250 Recycling times (120V or 230V, mains powered): |
0.65-0.2s |
| Recycling times (120V or 230V, BatPac): | 1.6-0.3s |
Profoto Acute2
| Acute2 2400 Recycling times (120V or 230V, mains powered): |
3.0-0.2s |
| Recycling times (120V or 230V, BatPac): | 7.5-0.5s |
| Acute2 1200 Recycling times (120V or 230V, mains powered): |
1.6-0.09s |
| Recycling times (120V or 230V, BatPac): | 4.0-0.3s |
All data are to be considered as nominal and Profoto reserves the right make changes without further notice.
Nomenclature
User Guide
Image
