Pro-B2 1200

Main Page Products Profoto Generators Battery

The World's Fastest Battery Generator. Imagine a top-of-the-line, heavy-duty 1200 Ws studio generator. Now imagine disconnecting the power cable from the wall and bringing Profoto Performance wherever you happen to be shooting.

The World's Fastest Battery Generator

Imagine a top-of-the-line, heavy-duty 1200 Ws studio generator. Now imagine disconnecting the power cable from the wall and bringing Profoto Performance wherever you happen to be shooting. That’s the Profoto Pro-B2. With performance surpassing a lot of traditional studio flashes, the Profoto Pro-B2 is our top-of-the-line battery generator. It’s all there: an 8 f-stop range, a 250 W modeling light, and recycling in 0.04–1.8 s. So if you need power on the go, without compromise, the Profoto Pro-B2 is the natural choice.

Features

- up to 200 full power ﬂashes from a single battery cassette
- ultrafast recycling: 0.04–1.8 s
- very short ﬂash durations: 1/2200–1/7400 s
- full 8 f-stop range in 1/2 or 1/10 step adjustments
- asymmetrical or symmetrical power distribution
- up to 250 W modeling lamp
- continuous modeling light or timer

Product number

900880

Meeting the Challenges on Location

Working on location is always a challenge: There is not enough time. There is not enough space. There is not enough light. And worse: there is no electricity.

A Battery Flash With Studio Performance.

Avoiding the inconvenience of a gas generator, you will look for battery-powered gear. Battery traditionally means serious compromise in power and features, but not any more. Leaving the studio with the Profoto Pro-B2, you are bringing 200 full power 1200 Ws flashes. Along with two lamp outlets for Pro heads that accept the entire range of Profoto light shaping tools; all of this in a pack that recycles in just 1.8 seconds or less.

Use it While Recharging it

Back in the studio, using the snap-on Universal Power Adapter, the Pro-B2 can actually operate as a regular flash generator while the battery is being recharged. The adapter is fast, charging an empty battery in just 2.5 hours, and it accepts a wide range of input power: 12–24 V or 90–240 V. Included with every Pro-B2 is a standard 110/230 V charger, recharging the battery in 5 hours.

Needless to say, the battery is replaceable. In other words, you just bring as much energy as needed. Also, because the Pro-B2 battery is completely memory free, there is no penalty for partial charging.

Fine-grained Energy Control

The output power can be adjusted over a full eight f-stop range, from 9 Ws up to 1200 Ws, in increments of 1/10 or 1/2 f-stop, for really precise control. The two outlets allow the power to be split symmetrically or asymmetrically with a 2:1 ratio. Of course the unit provides consistent output flash after flash, hour after hour.

Designed for the rugged conditions on location, the Pro-B2 features sturdy knobs, rubber-clad grips and frames, as well as the outlets and switches conveniently placed on top. Also, the generator is equipped with the Profoto special non-arching safety connectors, for easy connecting/disconnecting of the head at any time.

Fully Integrated With the Pro-7 System

The Pro-B2 accepts all Pro-7 heads, including the ProHead, ProRing and ProTwin head. Designed exclusively for the Pro-B2, there is also the smaller Pro-B head: light and portable, but still equipped with a strong 100 W modeling lamp.

Worth a special mention is the ProTwin head. With two separate Pro-B2 generators, it gives you 2400 Ws in a single head - or faster recycling. When used with a single generator, the twin head delivers extremely short flash durations.

Delivered with

Syncro cable
Power cable

Specifications – Pro-B2 1200

Energy	1200 Ws
Recycling	0.04–1.8 s
XFast Recycle Switch	N/A
Fast/Slow Recycle Switch	Yes
Flash Duration	1/7400–1/2200 s
Flash Capacity	200 @ Full Power
Modeling Lamps Total W/Pack	250 W
Modeling Lamps Max W/Head	250 W
Modeling Light Modes	Off / Max / Continuous / Timer
Triggering Manipulation	N/A
Energy Control f-stop Range	8
Energy Control Increments	1/10 or 1/2 f-stop adjustments.
Energy Control W/s Range	9–1200
Energy Precisions	1/100 f-stop flash to flash
Energy Distribution	Asymmetrical/Symmetrical
Asymmetry Max f-stop Range	2
Asymmetrical/Symmetrical 0utput	Yes
Flash Duration Minimum	1/7400
Flash Duration Maximum	1/2200
Flash Duration Twin	1/3300 **
Recycling	BATTERY: 0.04–1.8 230 V Twin + 2 Genenerators @ 1/2: 0.9 s ***
Outputf-stop at 2 m @ head settings	Magnum @ 8: 90.3 Zoom @ 4: 45.3 Umbrella @ 7: 22.3 Magnum + Twin & 2 Generators: 128.3 *
No of Units/Fuse / 120 V = 15 A	N/A
No of Units/Fuse / 230 V = 10 A	N/A
Battery	12 V 12 Ah
Battery Charging Time	5 h (standard multi-voltage charger) 2.5 h (Universal Power Adapter)
Auto Dumping	N/A
Color Temp. Control in 50 K Steps	N/A
Lamp Head Socket(s)	2
Sync Socket(s)	2
Wireless Radio	Yes, on the B2 1200R
Wireless Radio Range	N/A
Fan Cooled	N/A
Auto Multi-Voltage	N/A
Fuse	N/A
Battery Fuse	40 A
Computer Controlled Interface	N/A
Photo/IR-cell	Yes
Photocell Switch On/Off	Yes
Battery Indicator(s)	Yes
Audible Signal On/Off	Yes
Sync Voltage	Compliant to ISO 10330 Standard

Compatible Heads

Pro-B Head	Yes
ProHead	Yes
ProTwin	Yes
ProRing	Yes
ProRing2	Yes
D4 Head	N/A
D4 Twin	N/A
D4 Ring	N/A
AcuteB Head	N/A
Acute Head	N/A
Acute Twin	N/A
Acute Ring	N/A
Spotlights	Yes
Striplights	Yes

Measurements

Size 24x 17 x 23 cm

9.5 x 6.75 x 9 inch

Weight 12 kg

26 lbs
* To get twice the power by using two generators

** To get half the duration by using one or two generators.

*** To get half recycling and duration by using half power with two generators.

1: On/off Button : On
2: Modeling Light Control Button : MODEL
3: Recycle Button Slow/Fast : FAST
4: Audible Signal On/Off button : SOUND
5: Ready Lamp & Test button
6: Photocell Button : SLAVE
7: Sync Socket : SYNC
8: Photo/IR-cell
9: Power Socket : CHARGE
10: Battery Indicator
11: Lamp Head Socket : B
12: Sym/Asym Switch
13: Lamp Head Socket : A
14: Energy Control : POWER
15: Energy Control, fine adjustment : POWER
16: Modeling Light Control : MODEL